Filter
Top Products
U
SING
Y
OUR
P
RINTER
ON
A
N
ETWORK
E.11
E
Take the following steps to change the frame type format:
1
In ready mode press the Menu button ( ) until you see
“Network” on the bottom line of the display. Press the Enter
button ( ) to access the menu.
2
Press the Enter button ( ) when “Config Network”
displays on the bottom line.
3
Press the scroll button ( or ) to display “Yes” on the
bottom line. Press the Enter button ( ).
4
Press the Upper Level button ( ).
5
Press the scroll button ( or ) until “Netware” displays
on bottom line. Press the Enter button ( ).
6
Press the Enter button ( ) when “On” displays.
7
press the Upper Level button ( ), then use the scroll
button ( ).
8
Press the Enter button ( ) when “Config Netware”
displays.
9
Press the scroll button ( or ) to display “Yes” on the
bottom line. Press the Enter button ( ).
10
Press the Upper Level button ( ), then use the scroll
button ( ).
11
Press the Enter button ( ) when “IPX Frame Type”
displays.
12
Press the scroll button ( ) until you see the desired frame
type and press the Enter button ( ).
13
Press the ON Line/Continue button ( ) to return to
ready mode.