Filter
Top Products
23
Chapter 8. Control Commands
Command Notation
[Name] The name of the command.
[Format] The code sequence.
ASCII indicates the ASCII equivalents.
Hex indicates the hexadecimal equivalents.
Decimal indicates the decimal equivalents.
[ ] k indicates the contents of the [ ] should be repeated
k times.
[Range] Gives the allowable ranges for the arguments.
[Description] Describes the function of the command.
Explanation of Terms
LSB Least Significant Bit
HT
[Name] Horizontal tab.
[Format] ASCII HT
Hex 09
Decimal 9
[Description] Moves the print position to the next horizontal tab position.
LF
[Name] Print and line feed.
[Format] ASCII LF
Hex 0A
Decimal 10
[Description] Prints the data in the print buffer and feeds one line
based on the current line spacing.
CR
[Name] Print and carriage return.
[Format] ASCII CR
Hex 0D
Decimal 13
[Description] This command is set according to the DIP switch 1-1 setting
at power-on. This command is only available with a parallel
interface.
• This command prints the data in the print buffer and does not feed the paper.
• Sets the print starting position to the beginning of the line.