Filter
Top Products
33
ESC c 3 n
[Name] Select paper sensor(s) to output paper end signals.
[Format] ASCII ESC c 3 n
Hex 1B 63 33 n
Decimal 27 99 51 n
[Range] 0 ≤ n ≤ 255
[Description] Selects the paper sensor(s) to output paper end signals.
This command is available only with a parallel interface
and is ignored with serial interface.
• Each bit of n is used as follows.
• This command is available only with a parallel interface and is ignored
with a serial interface.
Bit Off/On Hex Decimal Function
Off 00 0 Paper roll end sensor disabled. 0
On 01 1 Paper roll end sensor enabled.
1 - 7 - - - Undefined.
ESC c 5 n
[Name] Enable/Disable panel button.
[Format] ASCII ESC c 5 n
Hex 1B 63 35 n
Decimal 27 99 53 n
[Range] 0 ≤ n ≤ 255
[Description] Enables or disables the panel button.
• When the LSB is 0, the panel buttons are enabled.
• When the LSB is 1, the panel buttons are disabled.
ESC d n
[Name] Print and feed n lines.
[Format] ASCII ESC d n
Hex 1B 64 n
Decimal 27 100 n
[Range] 0 ≤ n ≤ 255
[Description] Prints the data in the print buffer and feeds n lines.
ESC e n
[Name] Print and reverse feed n lines.
[Format] ASCII ESC e n
Hex 1B 65 n
Decimal 27 101 n
[Range] 0 ≤ n ≤ 2
[Description] Prints the data in the print buffer and feeds n lines
in the reverse direction.