Samsung SRP-250 Series Printer User Manual


 
24
DLE EOT n
[Name] Real-time status transmission.
[Format] ASCII DLE EOT n
Hex 10 04 n
Decimal 16 4 n
[Range] 1 n 4
[Description] Transmits the selected printer status specified by n
in real time, according to the following parameters:
n = 1 : Transmit printer status.
n = 2 : Transmit off-line status.
n = 3 : Transmit error status.
n = 4 : Transmit paper roll sensor status.
n = 1 : Printer status
Bit
Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
Off 00 0 Drawer open/close signal is LOW
(connector pin 3).
2
On 04 4 Drawer open/close signal is HIGH
(connector pin 3).
Off 00 0 On-Line. 3
On 08 8 Off-Line.
4 On 10 16 Not used. Fixed to On.
Off 00 0 Not waiting for on-line recovery. 5
On 20 32 Waiting for on-line recovery.
6 - - - Undefined.
7 Off 00 0 Not used. Fixed to Off.
n = 2 : Off-line status
Bit
Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2 - - - Undefined.
Off 00 0 Paper is not being fed by using the PAPER
FEED button.
3
On 08 8 Paper is being fed by the PAPER FEED
button.
4 On 10 16 Not used. Fixed to On.
Off 00 0 No paper-end stop. 5
On 20 32 Printing stops due to paper end.
Off 00 00 No error. 6
On 40 64 Error occurs.
7 Off 00 00 Not used. Fixed to Off.