Filter
Top Products
Introduction_ 20
Control panel overview
1
one-touch dial
Stores frequently-dialed fax number (See "Storing a number for One-touch Dialing" on
page 39).
2
Reduce/Enlarge
Makes a copy smaller or larger than the original.
3
Delay Send
Allows you to send a fax at a later time when you will not be present (See "Delaying a
fax transmission" on page 34).
4
Multi Send
Allows you to send a fax to multiple destinations (See "Sending a fax to multiple
destinations" on page 34).
5
Receive Mode
Converts the fax receiving mode (See "Changing the receive modes" on page 36).
6
Resolution
Adjusts the resolution of the documents for the current fax job.
7
Display
Shows the current status and prompts during an operation.
8
Arrow
Scroll through the options available in the selected menu, and increase or decrease
values.
9
OK
Confirms the selection on the screen.
10
Menu
Enters Menu mode and scrolls through the available menus (See "Machine status and
advanced feature" on page 42).
11
Status
Shows the status of your machine (See "Understanding the Status LED" on page 21).
12
Back
Sends you back to the upper menu level.
13
(Fax)
Activates fax mode.
14
(Copy)
Activates copy mode.
15
Numeric keypad Dials fax number, and enters the number value for document copies or other options.
16
Stop/Clear
Stops an operation at any time. The pop-up window appears on the screen showing
the current job that the user can stop or resume.
17
Start
Starts a job.
18
On Hook Dial
Performs same as you hold a handset under the telephone line is engaged.
19
Redial/Pause
In standby mode, redials the last number. Also in edit mode, inserts a pause into a fax
number.
20
Address Book
Allows you to store frequently used fax numbers or search for stored fax numbers.
21
(power)
Turns the machine on or off.
22
power LED
Shows whether the machine is turned on or off.