Filter
Top Products
O
THER
W
AYS
T
O
F
AX
7.4
Memory Transmission
Documents are automatically stored in memory and sent to a
remote station. Use this feature to send your documents to
multiple locations. After transmission, the documents are
automatically erased from the memory.
1
Feed the document(s) face down into the ADF.
2
Adjust the document settings if necessary. For details, see
“Adjusting Document Settings” on page 4.4.
3
Press Menu and then or repeatedly until “MEMORY
TX” appears on the display, then press Enter.
4
Enter the number of the remote machine using the number
keypad.
To enter the number, you can also press a one-touch
button, or press Speed/Status and enter a speed dial
number including a group dial number.
5
Press Enter to confirm the number. The display asks you to
enter another fax number to send the document.
N
OTE
:
A single broadcast (sending to multiple destinations) is
available for your product, so the “ANOTHER NO.” prompt does not
appear if any broadcast is currently set up and is not completed.
6
To enter another fax number, select “1.YES” and repeat
from step 4. You can add up to 25 destinations.
Note that you cannot use Group dial numbers for another
fax number.
7
To send to one location or when you complete the last fax
number setting, select “2.NO”.
8
The document will be scanned into the memory before
transmission. The LCD display shows the memory capacity
and the number of pages being stored in the memory.
9
The product begins sending the document in order of the
numbers you entered.