Filter
Top Products
O
THER
W
AYS
T
O
F
AX
7.13
7
4
Select “1.YES” to confirm your selection. The selected job is
cancelled.
Or
Select “2.NO” to cancel your selection, and returns to step
2.
5
Press Stop/Clear, and the product returns to Standby
mode.
Monitoring a Dual Job Status
Your product can perform more than one of many functions
simultaneously. For example, you can:
• Receive a fax into the memory while making a copy.
• Store a fax document for later transmission while printing an
incoming fax.
While the product performs dual tasks, press Speed/Status to
see the current status on the display of the other operation.
Each time you press Speed/Status, the current status of the
two operations displays alternatively.
Sending a Flash/Recall/R
Some special phone services require a switch-hook signal for
proper operation. For example, if you have call-waiting, you can
put a call on hold and take a second call on the same line by
pressing the Flash/Recall/R button.
1
When you are on the telephone and hear the call waiting
signal, press Flash/Recall/R. The first caller is on hold
and you are speaking to the second caller.
2
Press Flash/Recall/R again to talk to the first caller again.
Note
: If you do not have a special service that uses the switch-
hook signal, do not press
Flash/Recall/R
during a call. If you
do, you could disconnect the line.