Filter
Top Products
O
THER
W
AYS
T
O
F
AX
7.8
4
Press Enter to confirm the number. The display asks you to
enter another fax number to receive the document.
N
OTE
:
A single broadcast (sending to multiple destinations) is
available for your product, so the “ANOTHER NO.” prompt does not
appear if any broadcast is currently set up and is not completed.
5
To enter another fax number, select “1.YES” and repeat step
from 4. You can add up to 25 destinations.
Note that you cannot use Group dial numbers for another
fax number.
6
To receive from one location or when you complete the last
fax number setting, select “2.NO”.
The display asks you to enter the time when your product
calls the remote machine.
7
Enter the time using the number keypad. Use or to
select AM or PM in 12-hour mode. If you set a time earlier
than the current time, your product call the number at that
time on the following day.
Or
To call the remote fax machine(s) immediately, skip over
this step.
8
Press Enter when the time appears correctly on the display
or without entering the time. The display asks you to enter
a 4-digit code. Poll code “0000” represents no code.
If the remote machine is secured with a Poll code, you must
enter the correct code, and press Enter.
Or
If the remote machine is not secured with a Poll code, press
Enter to accept ‘0000’ which represents no code, or enter
0000.
9
If you have entered a specific start time, the product will
dial, and receive a document from the remote machine at
the time.
If not, the product dials the remote machine immediately.