Sanyo E11A102A Power Supply User Manual


 
20
9.2 UPS Startup (Battery Power)
During a power outage, low voltage, or other trouble with the AC input power to the UPS, you
can supply power to the inverter output from the built-in batteries.
Hold for about 3 seconds
BATT
EXT.
MAIN SW
Buzzer
Musical trill
LEDs
Green INPUT Blinking
Green INV.ON/STAND BY Off
Green OUTPUT Off
after 5 to 6 seconds
Green INPUT Blinking
Green INV.ON/STAND BY Lit
Green OUTPUT Lit
Press and hold it until the buzzer sounds. Release it when
the buzzer sounds.
Check that MAIN SW on the back panel is set to “OFF”.
LEDs are all off.
Switch is “OFF”
.