Sanyo PLC-XU111K Projector User Manual


 
12
Part Names and Functions
q
w
e
t
u
i
o
w LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.65, 71).
i WARNING indicator
–Lights red when the projector detects an abnormal
condition.
–Blinks red when the internal temperature of the
projector exceeds the operating range (pp.62, 71).
e ON/STAND–BY button
Turn the projector on or off (pp.22–23).
o POWER indicator
–Lights red when the projector is in stand-by mode.
–Lights green during operations.
–Blinks green in the Power management mode
(p.52).
r INPUT button
Select an input source (pp.30–31, 40–41).
!1 MENU button
Open or close the On-Screen Menu (p.24).
y POINT ed7 8 (VOLUME +/–) buttons
–Select an item or adjust the value in the On-Screen
Menu (p.24).
–Pan the image in the Digital zoom + mode (p.39).
–Adjust the volume level (Point 7 8 buttons) (p.27).
q ALARM indicator
Blinks red when informing the setting or battery
status (pp.58–59).
Top Control
r
y
!0 AUTO SETUP button
Correct vertical keystone distortion and adjust
computer display parameters such as Fine sync.,
Total dots, and Picture position (pp.26, 47).
!0
!1
u SELECT button
–Execute the selected item (p.24).
–Expand or compress the image in the Digital zoom
mode (p.39).
t KEYSTONE button
Correct keystone distortion (pp.26, 48).