Sanyo PLC-XU111K Projector User Manual


 
54
Setting
Key lock
Key lock
Security (Key lock, PIN code lock, Alarm settings)
PIN code lock
PIN code lock
This function locks the top control and remote control
buttons to prevent operation by unauthorized persons.
...... Unlocked.
...... Lock the operation of the top control. To
unlock, use the remote control.
...... lock the operation of the remote control.
To unlock, use the top control.
If the top control accidentally becomes locked and you
do not have the remote control nearby or there is
something wrong with your remote control, contact the
dealer where you purchased the projector or the service
center.
This function allows you to use the Key lock, PIN code lock,
and Alarm function to set the security for the projector
operation.
Select Key lock. Use
the Point
ed
buttons to choose
one of the options
and select [Yes] to
activate it.
This function prevents the projector from being operated
by unauthorized persons and provides the following
setting options for security.
Off............ Unlocked.
On1 .......... Enter the PIN code every time turning on
the projector.
On2 .......... Enter the PIN code to operate the projector
once the power cord is disconnected; as
long as the AC power cord is connected,
the projector can be operated without a PIN
code.
Whenever you change the PIN code lock setting or the
PIN code (the four-digit number), you are required to
enter the PIN code. The “1234” is set as the initial PIN
code at the factory.
If you want to change the PIN code lock setting, Press
the SELECT button and the PIN code dialog box appears.
When the projector is locked
with a PIN code, the PIN code
lock symbol appears on the
menu bar.