Sanyo PLC-XE40 Projector User Manual


 
21
Basic Operation
Menu bar
Pointer
(red framed )
Menu icon
Item data
Press the Point 7 8
buttons to adjust
the value.
SELECT
button
Pointer (red framed )
Press the Point ed
buttons to move the
pointer.
Item
How to Operate the On-Screen Menu
On-Screen Menu
Quit
Exit this menu.
The projector can be adjusted or set via the On-Screen
Menu. Refer to the following pages regarding each
adjustment and setting procedure.
Press the Point
7 8 buttons to select a Menu icon.
Press the Point ed buttons to select an item.
Press the SELECT button to show the item data. To
adjust the data, press the Point
7 8 buttons. Refer to
the following pages for each adjustment.
To close the On-Screen Menu, press the MENU
button again .
Press the MENU button to display the On-Screen
Menu.
Note:
• The selected item is not active until the SELECT button is pressed.
1
2
3
SELECT button
POINT buttons
Remote Control
MENU button
Basic Operation