Sanyo PLC-XE40 Projector User Manual


 
34
Computer Input
When the Digital zoom + is selected, the On-Screen Menu
disappears and “D. zoom +” is displayed. Press the
SELECT button to expand the image size. And press the
Point
ed7 8 buttons to pan the image. The Panning
function can work only when the image is larger than the
screen size.
A projected image can be also expanded by pressing the
D.ZOOM
button on the remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM
▲▼ buttons, SELECT, and Point button.
Digital zoom +
When Digital zoom – is selected, the On-Screen Menu
disappears and “D. zoom –”is displayed. Press the SELECT
button to compress image size.
A projected image can be also compressed by pressing the
D.ZOOM button on the remote control.
Digital zoom –
To return to the previous screen size, select a screen size in
the Screen Size Adjustment or select an input source from
the Input Source Selection (p. 26) again, or adjust the screen
size with the D.ZOOM ▲▼ buttons.
Remote Control
D.ZOOM + button
POINT buttons
SELECT button
D.ZOOM - button
For zooming in and out the images
Note:
• The panning function may not operate properly
if the stored Mode in the PC Adjust Menu is
used. (p. 30)
• The minimum compression ratio can be limited
depending on the input signal or when the
Keystone function is working.
• True, Full screen, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or 575p is
selected in the PC System Menu (p. 27)
• Digital zoom +/- cannot be selected when Full
screen or True is selected.
Adjust the screen scale and position manually.
Press the SELECT button at Custom icon. "Custom" is
displayed on the screen for a few seconds and then
"Aspect" box appears.
Scale H / V.......Adjust the Horizontal / Vertical screen
scale.
H&V..................When selecting "On", the aspect ratio is
fixed. "Scale V" becomes gray and
unselectable. Adjust "Scale H", then the
screen scale is automatically modified
based on the aspect ratio.
Position H / V ...Adjust the Horizontal / Vertical screen
position.
Common ........Save the adjusted scale. Press the
SELECT button at "Common" to display
the confirmation box. To save the scale,
press the SELECT button at "Yes".
When "Custom" is selected, the saved
scale is used.
Reset............Reset "Common" data. Press the
SELECT button at "Reset" to display the
confirmation box. To reset, press the
SELECT button at "Yes".
Custom
Note:
When no signal is detected, Normal is set
automatically and "Aspect" screen disappears.
The adjustable range of Scale H/V and Position
H/V can be limited depending on the input
signal.
Press the SELECT button at
"Common" or "Reset", to
display confirmation box.