Sanyo PLC-XE40 Projector User Manual


 
30
Computer Input
Adjust the horizontal area displayed by this projector. Press
the Point
7 8 buttons to decrease/increase the value.
Display area H
Adjust the vertical area displayed by this projector. Press
the Point 7 8 buttons to decrease/increase the value.
Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To store adjusted data, move the red framed pointer to the
"Store" and then press the SELECT button. Move the red
arrow pointer to any of Mode 1 to 5 in which you want to
store and then press the SELECT button.
To reset the adjusted data, select Reset and press the
SELECT button. The confirmation box appears and then
select "Yes". All adjustments return to their previous
figures.
Mode free
Vacant Mode
Values of “Total dots,”
“Horizontal,” “Vertical,”
“Display area H,” and
“Display area V.”
Close this dialog box.
To store adjusted data
To clear adjusted data
To clear the stored data, move the red framed pointer to the
"Mode free" and then press the SELECT button. Move the
red arrow pointer to the Mode that you want to clear and
then press the SELECT button.
Note:
• Display area (H/V) cannot be selected when 480i, 575i, 480p,
575p, 720p, 1035i, or 1080i is selected in the PC System Menu
(p. 27).
This Mode has
stored parameters .
Move the red framed
pointer to an item and
press the SELECT button.