Filter
Top Products
2
This transmitter POA-HDTM01 can be used on the specified projector with the receiver
board POA-MD26HDWL installed.
The image from the peripheral equipment is transferred to each projector via wireless
network. There is no need for wire connection between the transmitter and the projector.
You can select one of 2 installation modes as follows.
Single Mode
This mode is available only between one transmitter and one receiver.
Broadcast Mode
This mode is available between one transmitter and 2 or more receivers. It is useful to
project the same images to multiple screens.
ID = B
ID = B
Single Mode
Single Mode
ID = A
ID = A
Single Mode
Single Mode
ID = A
ID = A
ID = A
ID = A
Broadcast Mode
Broadcast Mode
✐ When selecting "INPUT 3 HDMI", only Single Mode is available. "INPUT 3 HDMI" cannot be selected in
the Broadcast Mode.
✐ The projector in this manual is PLC-XF47 for example.
Features and Design