Sanyo POA-HDTM01 Projector Accessories User Manual


 
English
5
HD DATA WIRELESS TRANSMITTER BOX
OWNER'S MANUAL
Safety Instructions
All the safety and operating instructions
should be read before the product is
operated.
Read all of the instructions given here
and retain them for later use. Unplug this
transmitter from AC power supply before
cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
Follow all warnings and instructions marked
on the transmitter.
For added protection to the transmitter
during a lightning storm, or when it is left
unattended and unused for long periods
of time, unplug it from the wall outlet. This
will prevent damage due to lightning and
power line surges.
Do not expose this unit to rain or use near
water... for example, in a wet basement,
near a swimming pool, etc...
Do not use attachments not recommended
by the manufacturer as they may cause
hazards.
Do not place this transmitter on an unstable
cart, stand, or table. The transmitter may
fall, causing serious injury to a child or adult,
and serious damage to the transmitter. Use
only with a cart or stand recommended
by the manufacturer, or sold with the
transmitter. Wall or shelf mounting should
follow the manufacturer's instructions, and
should use a mounting kit approved by the
manufacturers.
An appliance and cart
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
the appliance and cart
combination to overturn.
Slots and openings in the back and
bottom of the cabinet are provided for
ventilation, to ensure reliable operation
of the equipment and to protect it from
overheating.
The openings should never be covered with
cloth or other materials, and the bottom
opening should not be blocked by placing
the transmitter on a bed, sofa, rug, or other
similar surface. This transmitter should
never be placed near or over a radiator or
heat register.
This transmitter should not be placed in
a built-in installation such as a book case
unless proper ventilation is provided.
Never push objects of any kind into this
transmitter through cabinet slots as they
may touch dangerous voltage points or
short out parts that could result in a fire or
electric shock. Never spill liquid of any kind
on the transmitter.
Do not install the transmitter near the
ventilation duct of air-conditioning
equipment.
This transmitter should be operated only
from the type of power source indicated
on the marking label. If you are not sure of
the type of power supplied, consult your
authorized dealer or local power company.
Do not overload wall outlets and extension
cords as this can result in fire or electric
shock. Do not allow anything to rest on the
power cord. Do not locate this transmitter
where the cord may be damaged by
persons walking on it.
Do not attempt to service this transmitter
yourself as opening or removing covers may
expose you to dangerous voltage or other
hazards. Refer all servicing to qualified
service personnel.