Filter
Top Products
Unit 4: Operation
SATO GT4xxe Series Operator Manual PN 9001138A Page 4-7
CENTRONICS INTERFACE SETUP MODE
This chapter provides the programming sequences required for Centronics interface setup. Use
the keys of the printer’s operator panel to select and enter the required options.
Figure 4-6, Centronics Interface Mode
INTERFACE CARD
SETTING
YES NO
INTERFACE CARD
SETTING
CARD1 CARD2
RECEIVE BUFFER
MULTI 1 ITEM
CENTRONICS
ACK SIGNAL
ON OFF
CENTRONICS
FAULT SIGNAL
ON OFF
ONLINE
QTY: 000000
POWER
ENTER
OFFLINE
000000
ENTER CANCEL
CANCEL ENTER
LINE
ENTER
Press FUNCTION
anytime during
configuration.
Type password if
prompted, then press
ENTER.
Yes / NoENTER ENTER
DATA PORT
CARD1 CARD2
ENTER CANCEL
CANCEL ENTER
STATUS PORT
ENABLE DISABLE
CANCEL ENTER
IGNORE CR/LF
YES NO
ENTER CANCEL
IGNORE CAN/DLE
YES NO
CANCEL ENTER