SATO GT 410 Printer User Manual


 
Unit 5: Troubleshooting
SATO GTxxe Series Operator Manual PN 9001138A Page 5-2
ERROR SIGNALS
Error No. LCD Display Description
01
Machine Error
Cause:
Remedy:
Alarm sound:
External signal:
Circuit board problem.
Contact a sales outlet, dealer, or service center.
One long beep.
Machine error.
02
Flash ROM Error
Cause(s):
Remedy:
Alarm sound:
External signal:
1. Flash ROM cannot be accessed.
2. Illegal firmware operation requested by software.
Contact a sales outlet, dealer, or service center.
One long beep.
Machine error.
03
Parity Error
Cause(s):
Remedy:
Alarm sound:
External signal:
1. RS-232C communication settings fail parity check.
2. Error in cable connection.
Ensure correct communication cables and settings.
Three short beeps.
Machine error.
04
Overrun Error
Cause(s):
Remedy:
Alarm sound:
External signal:
1. RS-232C communication settings exceed legal values.
2. Error in cable connection.
Check and correct communication cables and settings.
Three short beeps.
Machine error.
05
Framing Error
Cause(s):
Remedy:
Alarm sound:
External signal:
1. Incorrect frame size for the RS-232C settings.
2. Cable connection trouble.
Check and correct communication cables and settings.
Three short beeps.
Machine error.
06
Buffer Overflow error
Cause(s):
Remedy:
Alarm sound:
External signal:
1. Size of received data exceeds size of receiving buffer.
2. Mismatched send/receive communication protocols.
Establish the correct communication protocol.
Three short beeps
Machine error