SATO GT 410 Printer User Manual


 
Unit 4: Operation
SATO GT4xxe Series Operator Manual PN 9001138A Page 4-26
ADVANCED MODE (4-3)
MENU DESCRIPTION
Is the premiere screen of the Advanced Mode. The Advanced
Mode is provided to make basic printer operational
adjustments. Typically, once these adjustments or settings have
been made, they will not require additional address unless a
new job is downloaded. The following table identifies the menus
of the Advanced Mode and their purpose.
Allows the darkness (density) selection of the printed image.
Has six selection options.
Determines whether the printer automatically detects the
installation of optional peripherals such as a peeler or cutter. If
detected, the optional peripherial will be used without further
configuration.
Allows the choice of continuous feed or tear-off operation. If the
relative accessories have been correctly installed, their
respective options will be displayed.
Allows the determination of wheather a backfeed motion will be
applied. If so, the selection of before or after the printing of each
label.
Allows the internal rewinder option to be turned activated or
deactivated as applicable.
Allows the printer to be switched to operate in the thermal
transfer or direct thermal mode as desired.
DARKNESS RANGE
A B C D E F
PRINTER TYPE
AUTO SETTING
YES NO
PRINTER TYPE
CONTINUOUS
TEAR OFF
DISPENSER
CUTTER
LINERLESS
BACKFEED MOTION
AFTER
BEFOR
NONE
REWINDER
ON OFF
PRINT METHOD
TRANSFER DIRECT