Filter
Top Products
59
Buzzer sound mode setting
A buzzer can be sounded upon starting up the printer and upon errors.
The buzzer is enabled by default. This can be enabled or disabled by the
initial operation and by online command.
Change buzzer sound setting
Note:
When the buzzer sound mode is enabled, the buzzer sounds upon
startup.
Release the PRINT/FEED button to stop the buzzer. To check the settings
for the buzzer sound setting mode, see the test print output (See P. 23).
To end buzzer sound setting, confirm that the STATUS LED is on in green,
then turn the power off. After changing the buzzer sound setting mode, be
sure to restore the DSW to their original settings.
Processing setting
(STATUS LED flashes green)
Setting completes
(STATUS LED lights green)
(1) Disable buzzer sound
DSW-1,2,3,4=(OFF,OFF,ON,ON) + cover open + PRINT button + POWER
(2) Enable buzzer sound
DSW-1,2,3,4=(OFF,OFF,ON,ON) + cover open + FEED button + POWER