Filter
Top Products
Appendix
194
11
Paper Size and Scan Area
❖
❖❖
❖ Exposure Glass
❖
❖❖
❖ Document Feeder (ADF)
Limitation
❒ There may be a difference in the size of the image when it is printed at the des-
tination.
❒ If you place an original larger than 11"×17"/A3 on the exposure glass, only an
area of 11"×17"/A3 is scanned.
Note
❒ Even if an original is correctly placed on the exposure glass or in the Docu-
ment Feeder (ADF), a margin of 3mm around each edge of the original may
not be sent.
❒ In the receiver uses paper of smaller width than the original, the image will
be reduced to fit the paper. ⇒ p.69 “Auto Reduction”
❒ The machine detects paper sizes in the following ways.
• When you place an original in the Document Feeder (ADF), an original
wider than about 10.4"(268mm) is scanned as 11".
An original narrower than about 10.4"(268mm) is scanned as 10", about
9.3"(235mm) is scanned as 8
1
/
2
".
Originals up to 1,200mm in length can be scanned.
RusC2FaxADEN-F_V4_FM.book Page 194 Monday, August 20, 2001 10:52 AM