Filter
Top Products
65
7. Appendix
The Relationship between the Resolution
and the Data Size
The relationship between the resolution and the data size is mutually contradictory.
When the resolution (dpi) is set to a high value, the scanning area becomes smaller.
Inversely, when the scanning area is set larger, the resolution becomes lower.
When the network delivery scanner and Document Server are used, the relation-
ship between the scanning resolution and the data size is shown below. If the
data size is too large, the message "Exceeded max. data capacity. Check the scan-
ning resolution." appears on the control panel of the machine. Specify the scan
size and resolution again.
Limitation
❒ Depending on the image compression level, the maximum image size will be
limited.
Reference
For information about the relationship between the resolution and the scan-
ning area when the machine is used as the network TWAIN scanner, see the
TWAIN driver help.
❖
❖❖
❖ When the "Text", "Text/Photo", or "Photo" is selected as the Scan Type
All combinations up to A3/11"x17" (297mm×432mm) and 600 dpi are possible.
❖
❖❖
❖ When "Gray Scale" is selected as the Scan Type
The data can be scanned with combinations marked with ❍ in the table.
This combinations marked with ✩ required the optional HDD.
100dpi 200dpi 300dpi 400dpi 600dpi
A3 ❍❍✩
B4 ❍❍❍✩
A4 ❍❍❍✩
B5 ❍❍❍❍✩
A5 ❍❍❍❍✩
B6 ❍❍❍❍✩
A6 ❍❍❍❍✩
A7 ❍❍❍❍✩
11x17 ❍❍✩
Legal(8
1
/
2
x14) ❍❍❍✩
8
1
/
2
x13 ❍❍❍✩
Letter(8
1
/
2
x11) ❍❍❍✩
5
1
/
2
x8
1
/
2
❍❍❍❍✩