Filter
Top Products
21
2. Configuring the Network
Configuring the Network
*1
The optional Scan Router V2 Lite/Professional is required to use this function. In ad-
dition to the network settings, you will also need to specify the settings for “Delivery
Server IP Address” and “Fax RX File Transmission” for file transfer.
*2
You will need to specify the settings for a network TWAIN scanner and network de-
livery scanner when using the scanner function.
*3
When you use this function, you need to have an optional network interface board
and 32MB of memory, or Scan Router V2 Lite which handled with the printer/scan-
ner unit. If you need to have Scan Router V2 Professional, see the “Printer Reference”
or “Scanner Reference”.
*4
Make the necessary settings for your network environment. For details about set-
tings, see the “Printer Reference”.
*5
Configure the TCP/IP when you use pure IP of NetWare 5.
This section describes the basic procedures. For detailed settings values, refer to
the Network Settings Items on page 30.
If your network environment has TCP/IP, you can configure the IP address by
using the SmartNetMonitor for Admin which handle with printer/scanner unit.
Mode Network Setting
Distribute received fax
documents
*1
IP Address, Subnet Mask, Gateway Address, Delivery Server IP
Address,Fax RX File Transmission, Effective Protocol (TCP/IP)
Scanner (Network Twain
Scanner)
*2
IP Address, Subnet Mask, Gateway Address, Effective Protocol
(TCP/IP)
Scanner (Network Deliv-
ery Scanner)
*3
IP Address, Subnet Mask, Gateway Address, Effective Protocol
(TCP/IP), Delivery Server IP Address,Number of Recalls, Recall
Interval time
Printer (TCP/IP)
*4
IP Address, Subnet Mask, Gateway Address, Network Boot, Effec-
tive Protocol, Ethernet Speed
Printer (NetWare)
*5
IP Address, Subnet Mask, Gateway Address,Effective Protocol,
NW Frame Type, Ethernet Speed
AdonisC2-sysEN122F_FM.book Page 21 Thursday, February 1, 2001 1:46 PM