Filter
Top Products
Configuring the Network
22
2
Configuring the Network with the
Operation Panel
This section describes the basic procedures. Please set the settings appropriate
for the network you are using.
Important
❒ These settings should be set by your systems administrator or after consulting
with your systems administrator.
The following table shows the operation panel settings and their default set-
tings. These are included in “TCP/IP Menu” of the ”Network“ menu.
*1
❍ means that this protocol is active.
A
Press {
{{
{User Tools/Counter}
}}
}.
The “User Tools Main Menu” appears.
Setting Name Value
IP Address 011.022.033.044
Subnet Mask 000.000.000.000
Gateway Address 000.000.000.000
Access Control 000.000.000.000
Access Mask 000.000.000.000
Network Boot None
NW Frame Type Auto Select
Effective Protocol TCP/IP
❍
*1
NetWare
❍
*1
NetBEUI
❍
*1
AppleTalk
❍
*1
Ethernet Speed Auto
AdonisC2-sysEN122F_FM.book Page 22 Thursday, February 1, 2001 1:46 PM