Savin 2335 All in One Printer User Manual


 
User Tools (System Settings)
46
3
File Transfer
Be sure to make these settings if you are using ScanRouter V2 Lite/Professional.
Note
The optional ScanRouter V2 Professional is required for distributing received
fax documents.
Delivery Server IP Address
Specifies the IP address of the ScanRouter V2 Lite delivery server for distrib-
uting documents or data from the machine.
Note
Default: 000.000.000.000
Press [
] or [
] to move between each group of three numbers.
If you make a mistake, press the Clear key and enter the correct number.
Fax RX File Transmission
Setting per Line
Specifies whether or not received fax documents should be sent to the
ScanRouter V2 Professional for each of the fax lines.
Note
Default: G3 Port 1/Do not Deliver, G3 Port 2/Do not Deliver, G3 Port 3/Do
not Deliver
Print at Delivery
Specifies whether or not received fax documents that are sent to the ScanRout-
er V2 Professional should also be printed by the machine at the same time.
Note
Default: No
File to Deliver
Specifies whether all received fax documents or only received fax docu-
ments that include delivery codes (documents with an ID and F code)
should sent to the ScanRouter V2 Professional.
Note
Default: File with Dlvry Code
Delivery Failure File (Dlvry Failure File)
If a received fax document cannot be sent to the ScanRouter V2 Profession-
al, the documents is stored in the machine's memory. To print this stored
data select Print File, to delete the data select Delete File.
Note
If the machine can send data to the ScanRouter V2 Professional, data is
sent automatically.
If you delete the data, you will not be able to distribute or print the data.
AdonisC2-sysEN122F_FM.book Page 46 Thursday, February 1, 2001 1:46 PM