Filter
Top Products
Combined Function Operations
8
1
Copy Mode
You can make basic copies, and en-
large/reduce, combine, or use vari-
ous other copy functions to make
copies. You can also add options to
further increase the number of func-
tions. For more details, refer to "Op-
tions" in the Copy Reference manual.
Changing to Copy Mode
You can always make a copy when
the machine isn't printing or scanning
a fax data.
A
Press the {
{{
{Copy}
}}
} key.
The copier display appears on the
panel display.
Reference
For details, see the “Copy Refer-
ence”.
Interrupt copying to make urgently
needed copies
You can interrupt the current job to
make a copy.
Preparation
Machine operations are different
depending on the settings “Print
Priority”(⇒ P.34 “General Features
1
/
2
”) or “User Code Management”
(⇒ P.47 “Key Operator Tools
1
/
2
”)
settings.
Limitation
❒ You cannot use the interrupt copy
function in the following cases:
• during fax immediate transmis-
sion
• while scanning an original for
memory transmission
• during interrupt copying
A
Press the {
{{
{Interrupt}
}}
} key.
If the machine is scanning origi-
nals, it will immediately stop the
scanning job. On the other hand, if
the machine is performing a copy
or print job, it will still continue the
job until you press the {Start} key
after pressing the {Interrupt} key.
When the current job stops, the in-
terrupt copy display appears on
the panel display.
Note
❒ When you interrupt a copying
job, remove the previous origi-
nal.
B
Make your copies.
Important
❒ If the remaining memory space
is 0%, the machine fails to re-
ceive fax data. Wait until the
machine completes printing a
received fax, then start making
copies.
Note
❒
While copying, a received fax doc-
ument is stored in memory and
the Receive File indicator is lit.
C
After interrupt copying is com-
pleted, remove the original and
delivered copies.
AdonisC2-sysEN122F_FM.book Page 8 Thursday, February 1, 2001 1:46 PM