Filter
Top Products
Configuring the Network with the Operation Panel
25
2
Note
❒ Press [←
←←
←] and [→
→→
→] Keys to move to the next entry field.
❒ If you enter the wrong IP address, press [Clear] and re-enter the IP ad-
dress.
D Press [OK].
G
Refer to step F
FF
F if you want to make settings for the following TCP/IP pro-
tocols: [Sub-net Mask], [Gateway Address], [Access Control] and [Access Mask].
H
If you use the DHCP server, press [Network Boot].
Note
❒ You need to change the settings when you use DHCP.
❒ Use the default IP address.
A Make sure that the [Network] key is pressed.
B Press [Network Boot].
C Press [DHCP], and then press [OK].
AdonisC2-sysEN122F_FM.book Page 25 Thursday, February 1, 2001 1:46 PM