Filter
Top Products
Settings You Can Change with the User Tools
43
3
Interface Settings/Network
1
/
2
—
2
/
2
❖
❖❖
❖ IP Address
Before using this machine with the network environment you must configure
the IP address.
Note
❒ Default: 011.022.033.044
❒ Do not use IP address that has been used for another machine. To get the
addresses, contact your network administrator.
❒ Press [←
←←
←] or [→
→→
→] keys to move between each group of three numbers.
❒ Press [Clear] if you enter the wrong number.
❖
❖❖
❖ Sub-net Mask
A number used to mathematically "mask" or hide an IP address on the net-
work by eliminating those parts of the address that are alike for all the ma-
chine on the network.
Note
❒ Default: 000.000.000.000
❒ Press [←
←←
←] or [→
→→
→] keys to move between each group of three numbers.
❒ Press [Clear] if you enter the wrong number.
❖
❖❖
❖ Gateway Address
A gateway is a connection or interchange point that connects two networks.
Configure the gateway address for the router or host computer used as a gate-
way.
Note
❒ Default: 000.000.000.000
❒ To get the addresses, contact your network administrator.
❖
❖❖
❖ Access Control and Access Mask
You can control the client access. Access control and Access mask set to be to-
gether.
Note
❒ Default: 000.000.000.000
❒ If you do not want to set any limitation for this machine, use default set-
tings.
❒ Press [Clear] if you enter the wrong number.
AdonisC2-sysEN122F_FM.book Page 43 Thursday, February 1, 2001 1:46 PM