Filter
Top Products
Remarks
138
6
D
DD
D
While pressing the button, slide
out the PCU, until it stops.
E
EE
E
Raise the green handle and slide
out the PCU toward you.
Important
❒ Do not tilt or drop the removed
PCU. Moving it suddenly can
cause toner leakage.
❒ Do not change the toner when
there is no PCU installed.
F
FF
F
Take the new PCU from the box
and, while holding the handle, re-
move the plastic bag.
Important
❒ Do not drop or mishandle the
removed PCU.
❒ Do not touch the side of the
PCU.
G
GG
G
Put the old PCU (removed in step
E
EE
E) into the plastic bag from step F
FF
F,
keeping it at the same angle as it
was when installed. Then, zip up
the plastic bag.
Note
❒ Do not tilt the used PCU after
taking it out of the machine. If
you do, toner might leak out.
H
HH
H
Remove the two red sheets from
the PCU in the order shown.
Important
❒ Remove the PCU keeping it lev-
el as shown. Otherwise, the ton-
er inside might leak out.
❒ After removing the black pro-
tection sheet, do not touch the
inside of the unit or the green
parts.
I
II
I
Align the new PCU with the rail
inside the machine. Slide the unit
all the way in.
RussianC3_ENgsg-F_FM.book Page 138 Monday, June 16, 2003 6:48 PM