Filter
Top Products
User Tools (System Settings)
54
4
❖
❖❖
❖ <F/F4> Size Setting
Currently three types of F size are available; 8
1
/
2
"× 13"L, 8
1
/
4
"× 13"L and
8"×13"L. The ADF or exposure glass cover sensor cannot distinguish these
three types of originals. This function sets the F size from the ADF or expo-
sure glass cover sensor. Auto Paper Select or Auto Reduce/Enlarge can be
used for F size originals based on this setting.
Note
❒ Default: 8
1
/
2
"
×
13"L
Output tray settings
Limitation
❒ You cannot interrupt the current job with a different function job that speci-
fies stapling or sorting.
❒ You can interrupt the current job with an ordinary copy job or facsimile re-
ception. The output tray used when the job is interrupted varies depending
on the type of finisher shift tray and output tray specified for interruption.
❖
❖❖
❖ When 500–sheet finisher is the finisher shift tray:
• When the output tray specified for the interrupting job is the finisher
tray, the interrupting job will be delivered to internal tray 1.
• When the output tray specified for the interrupting job is not the finish-
er tray, the interrupting job will be delivered to the specified output
tray.
❖
❖❖
❖ When 1000–sheet finisher is the finisher shift tray:
• When the output tray specified for the interrupting job is the finisher
tray, the interrupting job will be delivered to the finisher upper tray.
• When the output tray specified for the interrupting job is not the finish-
er tray, the interrupting job will be delivered to the specified output
tray.
❒ When the 500–sheet finisher or 1000–sheet finisher is installed and stapling is
specified for a job, the job will be delivered to the finisher shift tray, regardless
of the output tray specified.
RussianC3_ENgsg-F_FM.book Page 54 Monday, June 16, 2003 6:48 PM