Filter
Top Products
5
Guide to Components
1. Platen cover (option) or document
feeder (ADF) (option)
Lower the platen cover over originals
placed on the exposure glass for copying.
If you have the document feeder, insert a
stack of originals here. They will be fed
automatically.
(The illustration shows the document
feeder.)
2. Exposure glass
Position originals here face down for
copying. See
⇒
P.16
“Originals”
.
3. Internal tray
Copied paper is delivered here face
down.
4. Ventilation hole
Prevents overheating. Do not obstruct
the ventilation hole by placing or leaning
an object near it. If the machine over-
heats, a fault might occur.
5. Main power switch
Press this switch to turn the power on or
off.
This switch should only be used by a ser-
vice representative.
Note
❒
If the machine does not operate after
turning on the operation switch, check
if the main power switch is turned on.
If it is off, turn it on.
6. Behind cover
Flip up when you use the keys under-
neath.