Filter
Top Products
Network Settings
11
1
*1
The valid methods are in order from the left: ARP+PING, RARP+TFTP,
BOOTP, DHCP.
Note
❒ It is necessary to set the server when using RARP+TFTP, BOOTP, and
DHCP.
❒ When setting the IP address on the control panel, use None.
Reference
See Network Printing Guide when using DHCP.
D Press the [OK].
This completes the Network boot settings.
H
HH
H
Press the {
{{
{User Tools}
}}
} key.
A message “Parameter settings have been changed. You must restart the ma-
chine before the new settings take effect.” appears on the display panel.
I
II
I
Turn off and on the main power switch of the machine.
The set items become valid.
ARP&RARP&BOOTP bbb
None (Factory Settings)
RARP+TFTP b
BOOTP b
RARP&BOOTP bb
DHCP b
Item
Valid method
*1
AP RA BO DH
Make-Up
Image Density
Lighter
Darker 2
Darker 1
Normal
On Line
Auto On Line
ZDZS110N
Stamp