Filter
Top Products
Network Settings
13
1
E
EE
E
If necessary, make the Network boot settings.
A Select [7 Network] using the {
{{
{~
~~
~}
}}
} key or {
{{
{}
}}
}}
}}
} key.
B Press the {
{{
{OK}
}}
} key.
The network boot settings screen appears.
C Select the Network boot to be set using the {
{{
{~
~~
~}
}}
} key or {
{{
{}
}}
}}
}}
} key.
*1
The valid methods are in order from the left: ARP+PING, RARP+TFTP,
BOOTP, DHCP.
Note
❒ It is necessary to set the server when using RARP+TFTP, BOOTP, and
DHCP.
❒ When setting the IP address on the control panel, use None.
Reference
See Network Printing Guide when using DHCP.
D Press the {
{{
{OK}
}}
} key.
This completes the Network boot settings.
Item
Valid method
*1
AP RA BO DH
ARP+PING b
ARP&RARP bb
ARP&BOOTP bb
ARP&RARP&BOOTP bbb
None (Factory Settings)
RARP+TFTP b
BOOTP b
RARP&BOOTP bb
DHCP b