Filter
Top Products
Getting Started
20
1
Connecting the Machine to the Host Using the Parallel Cable
Connect the machine to the host computer using a parallel cable compliant with
IEEE 1284 (available separately).
Follow these steps to connect the machine to the host computer.
Important
❒ Before connecting an interface cable between the machine and a computer,
make sure that the machine is not operating, and then turn off the main power
switches of the machine and the computer.
❒ Be sure to use the designated interface cable. Using another cable may cause
radio interference.
A
AA
A
Plug the 36-pin end of the parallel cable into the parallel port at the right
side on the back of the machine.
B
BB
B
Squeeze the wire clips on each side of the connector together until they
snap into place. The clips hold the cable securely in place.
❖
❖❖
❖ Type A
❖
❖❖
❖ Type B
C
CC
C
Plug the other end of the parallel cable into the computer's parallel port.
If there are the wire clips, squeeze them on each side of the connector to-
gether.
ZJXH160J