Filter
Top Products
Getting Started
14
1
F
FF
F
Press the {
{{
{User Tools}
}}
} key.
A message “Parameter settings have been changed. You must restart the ma-
chine before the new settings take effect.” appears on the display panel.
G
GG
G
Turn off and on the main power switch of the machine.
The set items become valid.
Other Settings
The followings are other items you can set using the control panel besides the IP
address and the Network boot:
Note
❒ The settings are performed in Web Status Monitor or SmartDeviceMonitor
for Admin. See the corresponding online Help for details.
Items Factory Settings
Subnet mask 000.000.000.000
Default gateway address 000.000.000.000
Access control address 000.000.000.000
Access control mask 000.000.000.000
Frame Type (Netware) Automatic selection
Valid protocol All valid