Savin SDC410 Printer User Manual


 
2
Machine Exterior
Machine Exterior
1. Exposure glass Position originals here face down for copying.
(platen glass)
2. Platen cover (option) Lower this cover over originals placed on the exposure glass (platen glass)
for copying.
3. Operation switch Press this switch to turn the power (on the On indicator lights up). To turn
off the power off, press this switch again (the On indicator goes off).
4. Operation panel See page 5.
5. Front cover Open to access the inside of the machine.
6. Paper tray Set paper here. See page 172.
7. Auto duplex tray Use to make two-sided copies.
8. Stopper When you copy onto thin paper, raise this to prevent curling.
9. Copy tray Completed copies are delivered here.
10. Main power switch To start the machine, turn on this switch.
Note
If the machine does not operate after turning on the operation switch,
check if the main power switch is turned on. If it is off, turn it on.