Filter
Top Products
84
When you use Front & Back covers mode with 1 Sided → 1 Sided mode
1
Press the [Shift/Book] key.
2
Press the [Front & Back Cover] key.
3
Select the [Copy] or [Blank] key to choose
whether to copy onto the back cover.
4
Set your originals in the document feeder.
5
Press the Start key.
When you use Front & Back Cover mode with 2 Sided → 1 Sided or 2 Sided → 2 Sided
mode
1
Enter 2 Sided→1 Sided or 2 Sided→2 Sided
mode. ☛ See page 70 or 74.
2
Follow the steps 1 to 3 on above.
3
Select [Image] or [Blank] key depending on the
reverse side of first original has an image or not.
4
Select [Image] or [Blank] key depending on the
reverse side of last original has an image or not.
5
Press the [OK] key.
6
Follow the steps 4 and 5.
Cover Sheet—Adding or Inserting Sheets