Filter
Top Products
48
Basic Operation
Copying from the Bypass Tray
Use the bypass tray to copy onto thick paper, adhesive labels, OHP transparencies, or non-standard size
paper. Also use the bypass tray to copy onto the reverse side of paper that has already been copied onto.
Note
❐ The following limitations apply:
❐ Select one of the following settings or keys:
[Normal Paper] : normal paper
[Thick] : thick paper, post cards, adhesive labels, translucent paper
[Extra Thick] : Heavier than 157g/m
2
, 42 lb
[OHP] : OHP transparencies
[Duplex Back] : Copying onto the reverse side of paper that has been already copied onto. ☛ See page 52.
[Custom Size] : Select this after the paper type for non-standard sized paper. ☛ See page 50.
❐ When you copy onto OHP transparencies, you can select whether a blank slip sheet is inserted between OHP trans-
parencies.
❐ When you set several sheets at a time, fan them to get air between them before loading.
❐ If the copy paper is curled, gently roll it to remove the curl.
❐ When you copy onto OHP transparencies, insert them with the copy side up.
❐ Do not stack copy paper above the limit mark.
❐ If the copy paper is curled, correct it before setting paper in the bypass tray. If the curled is not corrected, a paper
misfeed might occur.
❐ When the optional sorter stapler is installed, copies made onto thick or OHP transparencies are not delivered in the
proof tray but in the first bin instead.
Acceptable paper types
Number of sheets that can
be set at one time
Normal paper (64 ~ 105g/m
2
, 17 ~ 28 lb)
Thick paper (105 ~ 157g/m
2
, 28 ~ 42 lb)
Extra thick paper (157 ~ 256g/m
2
, 42 ~ 68 lb)
Post cards
OHP transparencies
Adhesive labels
Translucent paper
Standard size Metric version:
l: A3, B4, A4, B5, A5, B6, 11" × 17", 12" × 18", 13" × 19"
p: A4, B5, A5, B6, A6, 11" × 8
1/2"
Inch version:
l:
81/2" × 11", 81/2" × 51/2", 10" × 14", 11" × 17", 12" × 18", 13" × 19", A3
p:81/2" × 11", 81/2" × 51/2", A4
Non-standard size Metric version:
Vertical: 100 ~ 330mm (in 1mm steps)
Horizontal: 140 ~ 483mm (in 1mm steps)
Inch version:
Vertical: 3.9" ~ 13" (in 0.1" steps)
Horizontal: 5.5" ~ 19" (in 0.1" steps)
Normal paper, OHP transparencies: 50 sheets
Thick paper, Extra thick paper, Post cards: 20 sheets
Adhesive labels: 1 sheet
Translucent paper: 50 sheets
GCBYPA1E
1
2
3
1:Horizontal 2:Vertical
3:Feed direction