Filter
Top Products
Chapter 5 BIOS diagnostics and setup 33
unreliable.
From the main menu highlight the Advanced CMOS Setup option
and press <ENTER>. Press any key to clear the warning screen.
Features
The following chart lists card settings which you can change in
Advanced CMOS Setup. It lists the default value for each setting.
This screen has several help screens, accessed by pressing the
<F1> key, which display setting options.
Help Screen Options
Feature Available options
Type Rate Programming Disabled (default)
Enabled
Type Rate Delay (msec) 250, 500 (default), 750,
1000
Type Rate (Chars/sec) 6, 8, 10, 12, 15 (default),
20,
24, 30
Above 1MB Memory Test Disabled (default)
Enabled
Memory Test Tick Sound Enabled (default)
Disabled
Memory Parity Error Check Enabled (default)
Disabled
Hit <DEL> Message Display Enabled (default)
Disabled
Hard Disk Type 47 RAM Area 0:300 (default)
DOS 1KB
This setting determines where in memory the hard disk infor-
mation is stored when you select hard disk type 47. If you
disable BIOS Shadow RAM, the Hard Disk Type 47 parameter
table will use regular RAM. There are two options, 0:300 (lower
system RAM) and DOS 1 KB (the top 1KB of 640 KB base
memory).
Wait for <F1> if Any Error Enabled (default)
Disabled
System Bootup Num Lock On (default)
Off