Filter
Top Products
69UPS Network Management Card 2 User’s Guide
Daylight saving
Path: Administration > General > Date & Time > daylight saving
Enable traditional United States Daylight Saving Time (DST), or enable and configure a customized daylight
saving time to match how Daylight Saving Time is implemented in your local area. DST is disabled by default.
When customizing Daylight Saving Time (DST):
• If the local DST always starts or ends on the fourth occurrence of a specific weekday of a month (e.g,
the fourth Sunday), choose Fourth/Last. If a fifth Sunday occurs in that month in a subsequent year,
the time setting still changes on the fourth Sunday.
• If the local DST always starts or ends on the last occurrence of a specific weekday of a month, whether
it is the fourth or the fifth occurrence, choose Fifth/Last.
Format
Path: Administration > General > Date & Time > date format
Select the numerical format in which to display all dates in this user interface. In the selections, each letter m
(for month), d (for day), and y (for year) represents one digit. Single-digit days and months are displayed with
a leading zero.
Use an .ini File
Path: Administration > General > User Config File
Use the settings from one NMC to configure another. Retrieve the config.ini file from the configured NMC,
customize that file (e.g., to change the IP address), and upload the customized file to the new
NMC. The file
name can be up to 64 characters, and must have the.ini suffix.
To retrieve and customize the file of a configured
NMC, see “How to Export Configuration
Settings” on page 73.
Instead of uploading the file to one
NMC, you can export the file to multiple NMCs by using an FTP
or SCP script or a batch file and the .ini file utility, available from www.apc.com/tools/download.
Status
Reports the progress of the upload. The upload succeeds even if the file contains errors, but a
system event reports the errors in the event log.
Upload
Browse to the customized file and upload it so that the current NMC can use it to set its own
configuration.