Filter
Top Products
UPS Network Management Card 2 User’s Guide70
Event Log, Temperature Units, Language, and
Logon Page
Path: Administration > General > Preferences
Color-code event log text
This option is disabled by default. Mark the Event Log Color Coding check box to enable color-coding of
alarm text recorded in the event log. System-event entries and configuration-change entries do not change
color.
Change the default temperature scale
Select the temperature scale (Fahrenheit or Celsius) in which to display all temperature measurements in this
user interface.
Specify the UI language
You can specify the default language for the user interface with the Language field. This can be set when you
log on also. From the drop-down box, select one of the languages displayed.
You can also specify different languages for e-mail recipients and SNMP trap receivers. See “E-
mail recipients” on page 64 and “Trap Receivers” on page 65.
Specify a default logon page
Configure the Web page that will display by default when you log on.
Reset the Network Management Card 2
Path: Administration > General > Reset/Reboot
Text Color Alarm Severity
Red Critical: A critical alarm exists, which requires immediate action.
Orange
Warning: An alarm condition requires attention and could jeopardize your data or equipment if
its cause is not addressed.
Green Alarm Cleared: The conditions that caused the alarm have improved.
Black
Normal: No alarms are present. The Network Management Card and all connected devices are
operating normally.
Action Definition
Reboot
Management
Interface
Restarts the interface of the NMC.
Reset All
1
Clear the Exclude TCP/IP check box to reset all configuration values; mark the Exclude
TCP/IP check box to reset all values except TCP/IP
1. Resetting may take up to a minute. The UPS name will not be reset.