Filter
Top Products
63230-216-207/A3 Chapter 3—Installation
9/2002 Mounting
7
© 2002 Schneider Electric All Rights Reserved
To mount the Power Supply (Square D part no. PS080), refer to Figure 3–4
and follow these steps:
1. Align the mounting groove on the power supply with the DIN rail.
2. Press the blue button to pull back the tabs.
3. Snap the power supply onto the DIN rail and release the blue button to
secure the unit onto the DIN rail.
NOTE: Refer to Appendix A—Specifications on page 29 for PS080
specifications.
Figure 3–4: Power Supply (PS080) mounting
30703005
30703004