Filter
Top Products
Chapter 5—Setup 63230-216-207/A3
Configuring the Power Server 9/2002
© 2002 Schneider Electric All Rights Reserved
28
Changing the Mode from Setup to Run Mode To change from setup mode to run mode, do the following:
1. Return the Power Server back to run mode: click the red Power Server
icon on the taskbar at the bottom right-hand portion of the screen.
The Embedded Switch dialog displays.
2. Click the Run Mode button.
The Power Server will reboot in run mode for normal operations. This
operation may take up to five minutes depending on the number and
types of devices in your
POWERLOGIC system.
3. From your PC desktop, close NetMeeting.