Filter
Top Products
34 Barracuda 4 Installation Guide, Rev. E
das Laufwerk auf nichtleitende Weise (galvanisch
isoliert) im Host-System einbauen. Die daraus u.U.
resultierende verstärkte elektromagnetische
Strahlung fällt in den Zuständigkeitsbereich des
Systemdesigners.
5. Replace the host system’s cover.
5. Setzen Sie das Gehäuseoberteil des Host-Systems
wieder auf.
Formatting the drive
Warning. Formatting a drive erases all user data. Be
sure you understand this principle before
formatting any hard disc drive.
It is not necessary to format a drive that
has been previously used to store data, un-
less your intention is to erase all user data.
1. Turn on DC power.
2. Boot the system from a system floppy disc or from a
previously installed hard disc drive if there is one.
3. Format the drive. The Barracuda 4 disc drive is
designed to operate with a variety of operating sys-
tems. Your system or SCSI controller manuals have
information about formatting and setting up the drive.