Filter
Top Products
Barracuda 4 Installation Guide, Rev. E 5
Seagate takes all reasonable steps to ensure that its
products are certifiable to currently accepted stan-
dards. Typical applications of these disc drives include
customer packaging and subsystem design. Safety
agencies conditionally certify component assemblies,
such as the Barracuda disc drive, based on their final
acceptability in the end-use product. The subsystem
designers are responsible for meeting these condi-
tions of acceptability in obtaining safety/regulatory
agency compliance in their end-use products and for
certifying where required by law. A necessary part of
meeting safety requirements is the provision for
overcurrent protection on drive SELV supply volt-
ages.
This unit is a component part and as such is not meant
to comply with FCC or similar national requirements as
a stand-alone unit. Engineering radiated emissions
test results are available through the Seagate Safety
Department to assist the subsystem designer.
Wichtige Sicherheitshinweise
Vorsicht. Beim Testen des Laufwerks auf dem
Prüftisch ist Fremdbelüftung vorzusehen, um eine
ausreichende Kühlung der Laufwerkkomponenten
sicherzustellen.
Verwenden Sie geeignete Sicherheits- und