Filter
Top Products
2 Barracuda 4 Installation Guide, Rev. E
• Ground yourself to the drive whenever the drive
electronics are or will be exposed. Connect yourself
to ground with a wrist strap (Seagate part number
12263496). Connection may be made to any grounded
metal assembly. As a general rule, remember that you
and the drive electronics must all be grounded to avoid
potentially damaging static discharges.
• Turn off the power before removing or installing the
DC power cable.
• Do not remove any circuit boards from the drive.
• Never use an ohmmeter on any circuit boards.
• When installing the drive on a carrier or tray, dis-
charge the carrier or tray prior to inserting it into the
system.
Important safety information and precautions
Caution. Use forced-air ventilation when bench-test-
ing the drive to ensure proper cooling of
drive components.
Use proper safety and repair techniques for safe, reli-
able operation of this unit. Service should be done only
by qualified persons. We recommend the procedures in
this manual as effective ways of servicing the unit.
Some procedures require the use of special tools. For
proper maintenance and safety, you must use these
tools as recommended.