Filter
Top Products
Sending a Fax by Automatic Dialling
51
2. Sending
Documents
Direct Keypad Dialling
You can also enter a full number with the number keys and then press
the
START
key to begin dialling. You can use this method to dial a
full number when you don’t need to speak to the other party before
faxing.
1
Load the document(s).
The display will show:
READY TO SEND
•
Set the resolution and/or contrast if
desired.
RESOLUTION/
RECEPTION MODE
2
Enter the number of the receiving
machine by pressing the numeric
keys.
•
If a pause is required between any
of the digits to access a special
service or an outside line, press the
REDIAL
key. The pause will
appear as a hyphen. Several pauses
can be entered in a row.
3
2 2
4
5 6
7
3
Check the display. If the number of
the receiving machine shown is
correct, press the
START
key.
•
If it is not correct, press the
STOP
key to backspace and clear one
digit at a time, and then re-enter the
correct digit(s).
START
(Example)
all-Fo50A.book Page 51 Friday, October 1, 1999 5:32 PM