Filter
Top Products
Distinctive Ring
80
Distinctive Ring (Requires Subscription to
Service)
If you subscribe to a distinctive ring service from your telephone
company, you will need to turn on the distinctive ring function. When
this is done, your fax machine will signal voice calls by the normal
ring pattern, and fax transmissions by a special ring pattern. In the
case of a fax transmission, your fax machine will automatically
answer the call and receive the fax.
The distinctive ring function is used with the reception mode set to
FAX. When your fax number is dialled, your fax machine will signal
the call with a special ringing sound, then answer automatically and
begin reception after the Number of Rings setting (the factory setting
is 2 rings). When your voice number is dialled, the fax machine will
signal the call with the normal ringing sound to let you know that you
must answer personally.
The factory setting is NO. If set to YES, both Australian (Fax Duet)
and New Zealand (FaxAbility) Distinctive Ring are supported.
Important:
♦
The distinctive ring function can only be used if you subscribe to a
distinctive ring service from your telephone company. Do not turn
on distinctive ring if you are on a normal line, as the fax machine
will not operate properly.
♦
If you turn on distinctive ring, the fax will not operate in TEL/FAX
reception mode.
1
Press these keys:
The display will show:
4
FUNCTION
OPTION SETTING
PRESS # OR
*
all-Fo50A.book Page 80 Friday, October 1, 1999 5:32 PM