Filter
Top Products
88
9. Maintenance
Cleaning the scanning glass and rollers
Clean the scanning glass and rollers frequently to ensure the quality of
your transmitted images and copies.
1
Grasp the finger hold and pull up to
open the operation panel.
3
Wipe the scanning glass and rollers
with a cotton pad.
•
Make sure that all dirt and stains
(such as correcting fluid) are
removed, as dirt will cause vertical
lines on transmitted images and
copies. (If necessary, wipe with
denatured alcohol.)
•
Adhesive cellophane tape is useful
for removal of debris from the
rollers.
Scanning
glass
2
Flip up the green levers on each side
of the white roller.
all-Fo50A.book Page 88 Friday, October 1, 1999 5:32 PM