Sharp FO-4400 Fax Machine User Manual


 
Optional Settings
109
6. Optional
Settings
Note: If you select AFTER for the BILLING CODE DIAL selection, you must press
after dialing if you use .
Setting 27: DEPARTMENT CODE DIGITS
Use this setting if you are using Telephone Billing and need to change the
number of digits of Department Codes to accord with your PBXs telephone
billing system. Enter any number from to .
Initial setting: 4
Setting 28: DISTINCTIVE RING
This sets the ring pattern to which your fax will answer if you subscribe to a
distinctive ring service. Enter a number from to ( to in
Canada) to select a pattern. See page 100 for more details.
Initial setting: 5
Setting 29: VERIFICATION STAMP
Press if you want the fax machine to stamp each original document page
as it is scanned. After scanning, you can check to see if all pages have been
stamped to verify that no double feeds occurred. Press to turn the
function off.
Note: To use this function, your dealer must install the Verification Stamp
option.
Initial setting: 2
Setting 30: COPY RESOLUTION
Use this setting to select the default copying resolution (the resolution used for
copying if a setting is not made with ). Press for STANDARD,
for FINE, or for SUPER-FINE.
Initial setting: 2
REDIAL
SPEAKER
3
9
1
5
1
7
1
2
RESOLUTION
1
2 3